- Chemicals
- How to handle Acetone
- How to handle Styrene
- How to handle Cobalt
- How to handle DMA
- Catalyst
- What causes gas when using a Vacuum
- Selecting the best catalyst for your process
- Catalyst Safety
- What can go wrong when you use too much or not enough catalyst
- Gel Coat
- How to use a film gauge
- A new way to do Gel Coat repairs
- How to repair Cracks in Gel Coat
- Flow Cote
- How to use a wet film gauge
- Understanding Flow Cotes
- Unsaturated Polyester Resins
- Understanding Post Cure
- Selecting the best resin for your process
- Laminates
- Cured Laminate Thickness
- Woven Roving versus Double Bias or Biaxial
- Choosing the right roller to use
- HAZNO
- How to measure Styrene levels
- New Obligations
- Release Agents – Poly Vinyl Release agent (PVA),
- Health and Safety – Treating Spills in the Workplace